Mikado Logo 600 SE

Products


  • Pinion 27 teeth Ø5mm,

    Pinion 27 teeth Ø5mm,

    Pinion 27 teeth Ø5mm, module 0,5 LOGO 10
    SKU: Mik-2827
    €12.00
    inc. VAT

     IN STOCK
  • Pinion 29 teeth Ø5mm,

    Pinion 29 teeth Ø5mm,

    Pinion 29 teeth Ø5mm, module 0,5 LOGO 10
    SKU: Mik-2829
    €12.00
    inc. VAT

     IN STOCK
  • Pinion 30 teeth Ø5mm

    Pinion 30 teeth Ø5mm

    Pinion 30 teeth Ø5mm, module 0,5 LOGO 10
    SKU: Mik-2831
    €12.00
    inc. VAT

     IN STOCK
  • Pins for yoke

    Pins for yoke

    Pins for yoke

    SKU: Mik-00912
    €0.80
    inc. VAT

     LOW STOCK
  • Pivot bearing 4x8x3

    Pivot bearing 4x8x3

    Pivot bearing 4x8x3
    SKU: Mik-2398
    €5.10
    inc. VAT

     IN STOCK
  • Pivot bolt M2.5x10 (2pc)

    Pivot bolt M2.5x10 (2pc)

    Pivot bolt M2.5x10 (2 pieces)

    SKU: Mik-1005
    €6.50
    inc. VAT

     IN STOCK
  • Pivot bolt M2.5x6 (2p)

    Pivot bolt M2.5x6 (2p)

    Pivot bolt M2.5x6 (2pieces)

    SKU: Mik-1003
    €6.50
    inc. VAT

     IN STOCK
  • Pivot bolt M2.5x8 (2p)

    Pivot bolt M2.5x8 (2p)

    Pivot bolt M2.5x8 (2pieces)

    SKU: Mik-1004
    €6.50
    inc. VAT

     IN STOCK
  • Pivot bolt M3x10 swashplate (long)

    Pivot bolt M3x10 swashplate (long)

    Pivot bolt M3x10 swashplate (long)
    SKU: MIK-4192
    €6.70
    inc. VAT

     48HR STOCK
  • Pivot bolt swashplate M3x8 (short)

    Pivot bolt swashplate M3x8 (short)

    Pivot bolt swashplate M3x8 (short)

    SKU: MIK-4191
    €6.70
    inc. VAT

     48HR STOCK
  • RC support LOGO 16/20

    RC support LOGO 16/20

    RC support LOGO 16/20
    SKU: Mik-2420
    €13.80
    inc. VAT

     IN STOCK
  • Rotor disk

    Rotor disk

    Rotor disk
    SKU: MIK-4049
    €14.80
    inc. VAT

     48HR STOCK
  • Rotor head / counterbearing combo, LOGO 600 SE

    Rotor head / counterbearing combo, LOGO 600 SE

    Rotor head / counterbearing combo, LOGO 600 SE

    This upgrade set contains:

    • new one piece yoke
    • new counterbearing with mainshaft support
    • main shaft for LOGO 600 SE

    Important note:

    This upgrade set works only in connection with a motor shaft 6mm x 32mm long.

    SKU: MIK-4764
    €99.00
    inc. VAT

     48HR STOCK
  • Rotor head yoke

    Rotor head yoke

    MIK4619 Rotor head yoke one-piece

    For the Mikado LOGO 550-600 SX

    Please use this yoke only with shorter mainshaft #4620. The swashplate driver arm will be mounted here directly on the yoke.

    SKU: MIK-4619
    €34.50
    inc. VAT

     48HR STOCK
  • Rotor head yoke

    Rotor head yoke

    Rotor head yoke, LOGO 500/600 upgrade set for LOGO helicopter with standard mainshaft (205mm) and separate swashplate driver. Important note: Use only with main shaft #04075 and swashplate driver #04018!

    SKU: MIK-4631
    €42.00 €45.00
    inc. VAT

     LOW STOCK
  • Rotor head/counterbearing combo

    Rotor head/counterbearing combo

    Rotor head / counterbearing upgrade combo
    SKU: MIK-4637
    €90.00 €99.00
    inc. VAT

     48HR STOCK
  • Rudder control guide

    Rudder control guide

    Rudder control guide LOGO 10
    SKU: Mik-2763
    €5.10
    inc. VAT

     IN STOCK
  • Rudder control guide

    Rudder control guide

    Rudder control guide for 25mm tailboom

    SKU: MIK-4139
    €4.90
    inc. VAT

     IN STOCK
  • Safety plugs

    Safety plugs

    Safety plugs

    SKU: Mik-2171
    €28.00
    inc. VAT

     IN STOCK
  • Safety ring 10mm

    Safety ring 10mm

    Safety ring 10mm
    SKU: MIK-1344
    €2.00
    inc. VAT

     LOW STOCK
  • Sanyo Eneloop 4.8V 800mah RX buffer battery for receiver

    Sanyo Eneloop 4.8V 800mah RX buffer battery for receiver

    Sanyo Eneloop 4.8V 800mah RX buffer battery for receiver

    SKU: MIK-4639
    €19.90
    inc. VAT

     IN STOCK
  • SAVÖX SB-2271SG BRUSHLESS

    SAVÖX SB-2271SG BRUSHLESS

    SAVÖX SB-2271SG DIGITAL SERVO BRUSHLESS MOTOR HIGH VOLTAGE STEEL GEARS (STANDARD SIZE)

    Specifications Dimension :

    • Height: 38,5 mm Dimension :
    • Length: 40,3 mm Dimension :
    • Weight: 69 gr Dimension :
    • width: 20,2 mm
    • Speed: 0.085 sec / 60° @ 6,0v
    • Torque: 15.0 kg- cm @ 6,0v
    • Type of case: Aluminium + plastic
    • Type of gears: Steel gears
    • Type of motor: Brushless motor
    • Type of servo: Digital servo
    • Type of spine: 25 tooth spine
    SKU: SB-2271SG
    €119.00
    inc. VAT

     48HR STOCK
  • SAVÖX SB-2272MG BRUSHLESS

    SAVÖX SB-2272MG BRUSHLESS

    SAVÖX SB-2270SG DIGITAL SERVO BRUSHLESS MOTOR HIGH VOLTAGE METAL GEARS (STANDARD SIZE)

    Features:

    Combines leading edge technology with super high 12 bit (4096) resolution and unique steel gears.
    Super light-weight.
    Brushless motor provides extremely high speed, incredible efficiency, and amazingly low power consumption.
    The full aluminum case design not only looks good but also allows for cooler and smoother operating temps.
    Our servos are totally green – from materials to production, these servos are environmentally friendly.
    Ideal for Gyro and rudder servo only.

    • Dimensions(mm): 40.3x20.2x38.5
    • Weight(g): 66.0
    • Speed(@4.8V sec/60): .055
    • Torque(@4.8V oz-in): 41.7
    • Speed(@6.0V sec/60): .045
    • Torque(@6.0V oz-in): 69.4
    • Speed(@7.4V sec/60): .032
    • Torque(@7.4V oz-in): 97.2
    • Gear: Metal
    • Bearing: 2BB
    • Case: Full Aluminum
    • 25 Tooth Spline
    • Frequency: 250-333hz
    SKU: SB-2272MG
    €119.00
    inc. VAT

     48HR STOCK
  • Savox SC-1257TG

    Savox SC-1257TG

    Standard Size Coreless Digital Tail Servo - Leading edge technology with super high "12 bits (4096) resolution" and "Titanium Alloy Gears"

    Extremely fast with 0.07 sec/60°speed at its size Extraordinarily light in weight, 20% lighter than its kind in the field
    The Coreless motor inside has brought the output performance to the top level - smoother, faster and more efficient
    Metallic case design not only exudes an exquisite style but helps the operating to stay cool and smooth.
    Super strong and precise-made Titanium metal gear form as the solid framework of our servo.
    Totally Green – from material to production, our servos are environmentally friendly.
    Ideal for CCPM on 600 and 700 level heli, steering servo on 1/10th scale Buggy

    Dimensions: 40.3*20*37.2mm
    Weight : 52.4 gr
    Speed @6v : 0.07
    Torque : 10 kg.cm
    Gear: Titanium & Aluminium
    2 ball bearings

    SKU: SC-1257TG
    €59.90
    inc. VAT

     IN STOCK

Manufacturers